24
Additional Operation - VCR part
Hi-Fi Stereo Sound System
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on your
DVD+VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks allow
you to make audio recordings in Hi-Fi stereo or bilingual
mode from a TV broadcast, stereo audio system, video
disc or another Hi-Fi VCR.
1. Your VCR’s allows you to enjoy broadcasts with
standard stereo, bilingual and mono sound. The par-
ticular type of sound received or that recorded will
be briefly displayed on the TV screen for a couple of
seconds:
STEREO
Sound is automatically recorded on the Hi-Fi stereo
and mono tracks of the video tape.
BIL
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
2. Press
AUDIO
repeatedly until the desired audio
mode appears.
3. The choice is
STEREO
,
LEFT
,
RIGHT
and
MONO
.
In
BIL
playback the primary language is output on
the left channel and the secondary channel is output
simultaneously from the right channel when audio
output is set to
STEREO
.
The primary language will be output from both chan-
nels when the audio setting is
MONO
.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to
MONO
.
On Screen Display (F.OSD)
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the tape.
1. Press
CLK/CTR
to display.
Press
CLK/CTR
repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
2. After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press
CLK/CTR
again to remove all displays from
the TV screen.
Tape Counter Memory Stop
The
Digital Tape Counter
can be displayed on the
display window instead of the time by pressing
CLK/CTR
on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on the tape.
1. Press
CLK/CTR
.
Press
CLEAR
to set the counter to 0:00:00.
Press
N
or start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
2. Press
x
when playback or recording is
complete.
Press
m
.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Summary of Contents for NDT-43
Page 38: ...P NO 3834RV0045H ...
