67
6. Appendix
6-6. Specifications
Model name
NC1201L-A
Projection method
3 chip DLP Cinema® method
0.69-inch DC2K chip
Panel resolution
2048 x 1080
Light source
Laser Diode
Screen sizes
Max. 12 m @14ft-L / Screen Gain 1.8 (Depends on setup conditions)
Contrast ratio
1650:1 with DCI specified color representation
Lens adjustment function
Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus
Signal input ports
When shipped from factory: Empty
(for mounting optional components) (Note 1)
External Control
RS-232C (D-sub 9pin) x 1
GPIO port (D-sub 37 pin) x 1
Service terminal (stereo mini jack) x 1
3D CTL (D-sub 15 pin) x 1
USB (Type A) x 1
Remote interlock port x 1
Ethernet port (RJ-45) x 1
Power supply voltage
AC 200 to 240 V, 50/60 Hz single phase
Input current
9.2 A
Power consumption
1304 W (Note 2)
Cooling method
Cooling air system
Noise level
Less than 47 dB
Installation
Orientation: Desktop/front, Desktop/rear, Ceiling/front, Ceiling/rear
Net weight
66 kg (Excluding lens)
Dimensions
680 mm (W) x 860 mm (D) x 333 mm (H) (Does not including protruding portions, includes foot.)
Environment
Operating temperature: 10 to 35°C
Operating humidity: 20 to 80% (non-condensing)
Storage temperature: -10 to 50°C
Storage humidity: 20 to 80% (non-condensing)
Operating altitude: 0 to 2600m/8500 feet
Regulations (Note 3)
<Safety>
<EMC>
Europe
EN60950-1
EN55022 Class A, EN55024, EN61000-3-2/-3-3
Russia
Belarus
Kazakhstan
EAC, IEC60950-1
EN55022 Class A, EN55024, EN61000-3-2/-3-3
Oceania
IEC60950-1
RCM, AS/NZS CISPR. 22 Class A
Asia
IEC60950-1
EN55022 Class A, EN55024, EN61000-3-2/-3-3
Korea
K60950-1
K00022 ClassA, K00024
K61000-3-11
Saudi Arabia
SASO
EN55022 Class A, EN55024, EN61000-3-2/-3-3
Japan
J60950-1
VCCI Class A, JIS C 61000-3-2
(Note 1) The video input slots are empty when the device is shipped. Input ports can be added by mounting option boards,
which are sold separately. (See page 77)
(Note 2) The value is typical.
(Note 3) Certificated by latest edition as of 2014. Described the certification standard for laser products in “Important Information”
of this manual. (See page 2)
* Note that these specifications and design can change without prior notice.
