34
3. Projection of Images (Basic Operation)
3-7. Turning your projector off
1
Press the POWER button on the projector control panel for three seconds or longer.
The light source is turned off, the POWER indicator blinks green, and the rear status indicator blinks orange (cooling
state). The fan will continue to rotate while cooling, and the amount of time remaining for cooling is displayed on the
LCD screen.
When the cooling is finished, the POWER indicator lights orange and the rear status indicator lights orange (standby
state). KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30
seconds by default. Buttons on the control panel do not function while KEY LOCK is on. (See page 32)
2
Wait till the projector enters standby state before turning off the main power switch of the projector.
The POWER indicator is turned off and the main power is turned off.
3
Turn off the AC power to the projector.
NOTE
In the following instances, do not turn off the main power switch or disconnect the AC power. Doing so can dam-
age the projector.
• While projecting images
• While the power is on
• During the cooling after the power is turned off.
- When using the NP-90MS01/NP-90MS02: 90 seconds
• During IMB operation (if the projector is not in standby state)
