- 36 -
1. About This Product
1-1. Specifications
Item
Specification
Remarks
Fibre Channel interface
N8190-171 Short wave laser (LC connector) x 1
N8190-172 Short wave laser (LC connector) x 2
SFP+ module x1
SFP+ module x2
Fibre Channel link rate
32Gbps,16Gbps
Auto
PCI Express Connector
x8
Support
PCI Express 3.0
Physical dimensions
168mm(W) x 69mm(D)
MD2
Weight
Under. 0.2kg
Operating voltage
PCI Express 12V
Power consumption
Typical Max
N8190-171 8.8W 9.8W
N8190-172 9.6W 10.6W
Environmental
condition
Operating
Temperature 0 - 55 degrees C
Humidity 10 - 90 %
No condensation
Storage
Temperature -20- 85 degrees C
Humidity 5 - 95 %
1-2. Features
This product is a Fibre Channel host bus adapter card. This product has two Fibre Channel interface
connectors.
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
This product is designed to transfer data at high-speed. For the best performance, it
is important to avoid your PCI Express bus becoming a bottleneck that will result in
slow data transfer.
You can connect this product in more than x8 bandwidth PCI
Express 3.0.
1-3. Before Using
In addition to documentation you receive with your Fibre Channel (FC) Host Bus Adapter
(HBA), you must review the NEC-specific FC HBA documentation and ensure that you have the
latest driver, firmware, and supplemental information.
Access to the NEC Web site (http://www.nec.com/express/).
Notice