- 31 -
1. About This Product
1-1. Specifications
Item
Specification
Remarks
Fibre Channel interface
Short wave laser (LC connector) x 2
SFP+ module x 2
Fibre Channel link speed
8Gbps,4Gbps
PCI EXPRESS Connector
X8
Support
PCI EXPRESS 2.0
Physical dimensions
64.42mm(W) x 167.64mm(D)
Weight
Under. 0.2kg
Operating voltage
PCI EXPRESS 3.3V/12V
Power consumption
Typical 8.8W
Max 13.3W
Operating
Temperature 0 - 45 degrees C
Humidity 5 - 95 %
Environmental
condition
Storage
Temperature -40- 70 degrees C
Humidity 5 - 95 %
No condensation
1-2. Features
The N8190-154 Fibre Channel Controller (2ch) is a Fibre Channel host bus adapter card. This
product has two Fibre Channel interface connectors.
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
This product is designed to transfer data at high-speed. For the best performance,
it is important to avoid your PCI EXPRESS bus becoming a bottleneck that will
result in slow data transfer. If you use a PCI EXPRESS 1.X slot for this product,
you can connect this product in more than X8 bandwidth slot and if you use a PCI
EXPRESS 2.0 slot for this product, you can connect this product in more than X4
bandwidth slot.
Notice