- 33 -
4-1. Selection and Installation of Bracket
A standard bracket is installed on this product. When fixing this product to a PCI slot optimized for
the low profile type, replace the bracket with the attached low profile one. The procedure is as
follows.
Exchange of a bracket uses the minus screwdriver suitable for the size of a screw.
1
.
Remove the two screws.
2
.
Remove the bracket from this product.
3
.
Install the low profile bracket to this product.
4
.
Tighten the two screws.
Follow the same procedure when the low profile bracket is replaced with the
standard bracket.
Make sure to keep the removed bracket carefully.
Tips
Tips
2
1
3
4
Notice