70 External AIT
3
Click [Driver] tab.
4
Click [Add] button.
[Install Driver] dialog box appears.
5
Click the [Use Disk] button.
The [Install from floppy disk] dialog box is displayed.
6
Confirm that “A:\” is specified for the distributed file copy source (C):, and click the [Browse]
button.
The [Browse] dialog box appears.
7
Point to “WinNT4.0”, then click the [Open] button.
[NT4ait.inf] is displayed in the [Search Files] dialog box.
8
Confirm that “NT4ait.inf” is specified as the file name, then click the [Open] button.
9
Confirm that “A:\WinNT4.0” is specified for [Distributed file copy source (C)] and click the
[OK] button.
The [Installing Drivers] dialog box appears.
10
Click “Sony AIT Tape Drive (NT 4.0)” displayed in the [Tape Device] box, and click the [OK] button.
The driver files are copied, then installation is completed.
11
Restart the system.
Important
When using Windows NT backup, do not install any other backup software. If any other backup
software is installed, make sure you uninstall it. Further, when using backup software other than
Windows NT backup, make sure you delete “Sony AIT Tape Drive (NT 4.0)”.
Hint
✎
The tape device driver installed after restarting the system is enabled.
Summary of Contents for N8160-48
Page 2: ......
Page 43: ...仕 様 41 198 0 mm 64 5 mm 246 mm 重量 2 3 kg 寸法 重量 ...
Page 87: ...Specification 85 Dimensions weight 64 5 mm 198 0 mm 246 mm Weight 2 3 kg ...
Page 95: ......
