68 External AIT
SCSI ID Setting
The SCSI ID is set by the rotary switch on the rear panel. Press the + or - buttons to move the
number up or down, respectively.
As shipped from the factory, the SCSI ID is set to 0. Press the switch buttons, if necessary, to select
the SCSI ID number you require.
Important
• The SCSI ID must be defferent from IDs of the other perepherals on the SCSI bus.
• Do not set the SCSI ID to “7”.
• As shipped from the factory, SCSI parity is enabled and Term power is ON.
• Before changing the SCSI ID setting, be sure to turn off the power with the POWER switch on
the rear panel.
• Firmly and completely press the SCSI ID rotary switch and make your settings.
Summary of Contents for N8160-48
Page 2: ......
Page 43: ...仕 様 41 198 0 mm 64 5 mm 246 mm 重量 2 3 kg 寸法 重量 ...
Page 87: ...Specification 85 Dimensions weight 64 5 mm 198 0 mm 246 mm Weight 2 3 kg ...
Page 95: ......
