NEC N8143-93, Setup Manual

Page: 16 / 30

Keep this User’s Guide at hand for quick reference at anytime necessary.
Before handling the kit, read this guide carefully to understand the handling.
When you transfer your rack conversion kit to a third party, provide this guide along with the product.
N8143-93 Rack Conversion Kit
Setup Guide
Preface
The Rack Conversion Kit allows you to convert the server of the tower model to that of the rack mount
model, which can be mounted on a 19-inch rack.
Before handling the kit, read this guide and "Notes on Use" in the User's Guide of the server carefully
to understand the handling.
NOTES ON USE - Always read the Notes -
Observe the following instructions to use the rack conversion kit correctly and safely. For symbols, see
"SAFETY INDICATIONS" described in the User's Guide of the server.
CAUTION
The Rack Conversion Kit must be used for the server and the expansion units to which the
Rack Conversion Kit is specified as option.
Do not use the Rack Conversion Kit for any other devices than specified. Doing so may
cause a personal injury and/or breakage of surrounding devices.
At least three persons are required to install the server with this conversion kit in rack.
Failure to follow this instruction may cause the rack to fall to result in personal injury and/or
breakage of surrounding devices.
Before using the Rack Conversion Kit, be sure to read the User's Guide of the server for how
to setup your server. Incorrect installation may cause a personal injury and/or breakage of
surrounding devices.
Route cables so that they do not disturb the adjacent servers and/or guide rails at both sides.
Incorrect installation may cause a fire, burn, and/or breakage of surrounding devices.
Do not disassemble, repair, or modify the product.
Doing so may cause a personal injury or property damage.
856-180253-001