１２
(9)
Check to see that no excess force is applied to cables by pulling out the server and
pushing it back in. And this cable arm is rotated to backside for connection of cables
and exchange of the power supply unit. Check to see that no excess force is applied to
cables by rotating it. If the excess force is applied to cables, tie again cables more
slackly and check to see that no excess force is applied to cables and check the cable
does not touch slide rails, neighboring units, and the rack.
(10)
Fix the arm stopper with a screw (D) to the cable arm.
Arm Stopper
Cable Arm
