![background image](http://html.mh-extra.com/html/nec/n8104-7149/n8104-7149_user-manual_247552040.webp)
4-5. Removal
A procedure until it removes a board from a server is shown. For this procedure, removal of a cable and
the removal procedure of a SFP+ module are described. When you remove individually, please carry
out a procedure until it removes the candidate for removal.
In addition, it is not necessary to turn the power of the server OFF, when a cable or SFP module is
removed.
Ძ
.
Remove the Cables.
Pull the cable with pressing down the latch
of the cable
Important
Please use a driver etc., when you are hard to press down a latch.
Წ
.
Remove the SFP+ module.
1. Flip down the Lever of the SFP+ module
2. Remove the module from the slot toward
to the arrow.
Important
Attach the dust cover to the SFP+ module. The cover has been kept.
Ჭ
.
Remove the adapter from the server.
Turn the power off after shutdown process on
㻌
the OS. Then, unplug the power cord of the
server.
For detail information, See the User’s guide
㻌
of the server.
Summary of Contents for N8104-7149
Page 22: ... ...
Page 46: ... 855 901071 001 A ...