E-
13
□
Make sure a tip of the cable is not dusty or not broken.
Check a tip of the cable.
If it has broken, replace the cable.
If it is dirty or any dust sticks, Remove the dust or clean a cable of the cable.
Make sure you are using the specified optical module.
Check the link partner (switch, hub, etc.)
□
Check a setting or configuration on the link partner.
Make sure the link partner setting is correct.
If the setting is mis-configured, correct the setting.
If the partner’s port is disabled, enable it.
If the problem persists even after you checked the above items, something may be wrong with
this adapter.
Please contact to reseller, sales agents or service representative.
EU Contact:
NEC Nederland B.V.
Olympia 4, 1213 NT Hilversum, The Netherlands
Summary of Contents for N8104-213
Page 37: ......
