NEC N8100-1794F User Manual Download Page 98

Page: 98 / 128

1. Installing Internal Optional Devices

Express5800/R120d-1M User’s Guide

Chapter 2 Preparations

1.19.2

Installation

Follow steps below to install a power supply unit:

1. Refer to steps 1 to 4 in

Chapter 2 (1.3 Overview of Installation and Removal)

for preparations.

2. Remove the blank cover.

Note

Keep the removed blank cover for future use.

3. Insert the power supply unit until it is locked with clicking sound.

4. Connect power cords.

Use the power cord that comes with the server and the one comes with the additional power supply
unit.

Slot for additional

power supply unit

Slot for standard

power supply unit

REAR

Power supply unit

(standard)

Power supply unit

(additional)

Power cord for

power supply unit

Power cord for

power supply unit

Summary of Contents for N8100-1794F

































































































































Search results

Summary of Contents for N8100-1794F

Reviews:

Related manuals for N8100-1794F

Brands by name

Popular brands

NEC N8100-1794F, User Manual

Search results

Summary of Contents for N8100-1794F

Reviews:

Related manuals for N8100-1794F

Brands by name

Popular brands