NEC N8100-1056F, User Manual, Page: 281 / 408

Troubleshooting 8-33
11.
Follow the instruction displayed on the screen, and then press L at the screen which
request you to insert system recovery disk. The system will be restarted once.
NOTE:
Starts the procedure without system recovery disk.
12.
Repeat steps 4 to 11.
The recovery procedure will be started.
During the recovery, the missing files and the damaged files are replaced either to the files
in C:\ I386 folder of hard disk drive or the files in systemroot\ Repair of the system
partition. These replaced files do not reflect the changes of the configuration after the
setup at all.
13.
Follow the instruction displayed on the screen.
If you take a note of any file name in which trouble is detected during the procedure, it is
useful to diagnose how the system has been damaged.
14.
Terminates the procedure if the recovery is successful.
You can verify that the replaced files are correctly copied to the hard disk drive if the
computer is restarted normally.