English-24
LAN SETTING
When you use this function, EXTERNAL CONTROL should be “LAN”.
NOTE: When changing the LAN SETTING, turn the monitor off and then back on.
After turning on the monitor, you need to wait several seconds until the LAN SETTING is applied.
DHCP
Enabling this option automatically assigns an IP address to the monitor from your DHCP server.
DISABLE
Disabling this option allows you to register the IP address or subnet mask number obtained
from your network administrator.
NOTE: Consult your network administrator for the IP address when “ENABLE” is selected for [DHCP].
IP ADDRESS
Set your IP address of the network connected to the monitor when “DISABLE” is selected for [DHCP]. 192.168.0.10
SUBNET MASK
Set your subnet mask number of the network connected to the monitor when “DISABLE” is
255.255.255.0
selected for [DHCP].
DEFAULT GATEWAY
Set your default gateway of the network connected to the monitor when “DISABLE” is selected
192.168.0.1
for [DHCP].
DNS PRIMARY
Set your primary DNS settings of the network connected to the monitor.
0.0.0.0
DNS SECONDARY
Set your secondary DNS settings of the network connected to the monitor.
0.0.0.0
SETTING COPY
In a daisy chain scenario, select the OSD menu categories that you want to copy over to the
NO
other monitor. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”.
This function resets to default when power is off. This function has a limit depending on the
cable you use.
COPY START
Select “YES” and press the SET button to start copying.
ALL INPUT
All input terminals settings are copied when you select this item. Default is off.
MULTI DISPLAY RESET
Resets “MULTI DISPLAY” options back to factory settings.
-
POWER SAVE
Sets how long the monitor waits to go into power save mode after the signal is lost.
ON
All inputs except for TV*
Note: When connecting DVI, the video card might not stop sending the digital data even though
the image might have disappeared. If this occurs the monitor will not switch into power
management mode (standby mode).
STANDBY MODE
Lowers power consumption.
ECO
Note: When in ECO STANDBY mode, DDC/CI does not function.
STANDBY
HEAT STATUS
Displays status of the FAN, BRIGHTNESS and TEMPERATURE.
-
FAN CONTROL
Cooling fan reduces the temperature of the display to protect from overheating.
AUTO
If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed.
SCREEN SAVER
Use the SCREEN SAVER function to reduce the risk of Image Persistence.
GAMMA
The display gamma is changed and fixed when “ON” is selected.
OFF
BRIGHTNESS
The brightness is decreased when “ON” is selected.
OFF
NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.
MOTION
The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT)
OFF
at user determined intervals. You can set interval time and zooming ratio.
This function is disabled when PIP, STILL, TEXT TICKER or TILE MATRIX are enabled.
SIDE BORDER COLOR
Adjusts the color of the side borders when a 4:3 image is displayed.
15
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
AUTO BRIGHTNESS
Adjusts the brightness level according to the input signal.
OFF
DPORT, DVI, VGA, RGB/HV inputs only
NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.
CHANGE SECURITY
Allows the security password to be changed.
-
PASSWORD
The factory preset password is 0000.
SECURITY LOCK
Locks the security password.
OFF
DDC/CI
ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor.
ENABLE
DISPLAY PROTECTION
Resets the following settings within the DISPLAY PROTECTION menu back to factory setting:
-
RESET
POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR,
AUTO BRIGHTNESS, DDC/CI.
DISPLAY PROTECTION
*: The product you purchased may not have this feature.
