background image

English-20

Setting

Default

BRIGHTNESS

Adjusts the overall image and background brightness. Press + or - to adjust.

70

Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be changed.

CONTRAST

Adjusts the image brightness in relationship to the background. Press + or - to adjust.

50

Note: When sRGB is selected in picture mode, this function cannot be changed.

SHARPNESS

Adjusts the crispness of the image. Press + or - to adjust.

50*

2

BLACK LEVEL

Adjusts the image brightness in relationship to the background. Press + or - to adjust.

50

Note: When sRGB is selected in picture mode, this function cannot be changed.

TINT

Adjusts the tint of the screen. Press + or - to adjust.

50

Note: When sRGB is selected in picture mode, this function cannot be changed.

COLOR

Adjusts the color depth of the screen. Press + or - to adjust.

50*

2

Note: When sRGB is selected in picture mode, this function cannot be changed.

COLOR TEMPERATURE

Adjusts the color temperature of the entire screen. A low color temperature will make the screen

10000K

reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further
adjustment, the individual R/G/B levels of the white point can be adjusted. To adjust the R/G/B
levels, CUSTOM must be showing as the COLOR TEMP selection.
Note: When sRGB is selected in picture mode, predefined 6500k is set so it cannot be changed.
When PROGRAMMABLE is selected in GAMMA SELECTION, this function cannot be changed.

COLOR CONTROL

Adjusts the hue of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation.

0

Note: When sRGB is selected in picture mode, this function cannot be changed.

GAMMA SELECTION

Select a display gamma for best picture quality.

PROGRAMMABLE

Note: When sRGB is selected in picture mode, this function cannot be changed.

(except sRGB

NATIVE

Gamma correction is handled by the LCD panel.

2.2

Typical display gamma for use with a PC.

2.4

Good for video (TV, DVD, etc.)

S GAMMA

Special gamma for certain types of movies. Raises the dark parts and lowers the light parts
of the image (S-Curve).

DICOM SIM.

DICOM GSDF curve simulated for LCD type.

PROGRAMMABLE

Gamma curve of the factory setting is installed.
A programmable gamma curve can be re-loaded using NEC optional software.

MOVIE SETTINGS

NOISE REDUCTION

Adjusts the amount of noise reduction. Press + or - to adjust.

6*

2

TV, VIDEO1, VIDEO2, S-VIDEO inputs only

FILM MODE

Automatically senses the sources frame rate for optimal picture quality.

AUTO*

2

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only

ADAPTIVE CONTRAST Sets the level of adjustment for dynamic contrast.

OFF

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only

PICTURE MODE

Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or

STANDARD

[AMBIENT2]. See page 18.

PICTURE RESET

Resets the following settings within the PICTURE menu back to factory setting:

-

BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR
TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, MOVIE SETTINGS.

AUTO SETUP

Automatically adjusts Screen Size, H position, V position, Clock, Clock Phase and White Level.

-

VGA, RGB/HV inputs only

AUTO ADJUST

H Position, V Position and Clock Phase are adjusted automatically upon power on.

OFF

VGA, RGB/HV inputs only

H POSITION

Controls the horizontal position of the image within the Display area of the LCD.

-

All inputs except DVI, HDMI, DPORT

Press + to move right. Press - to move left.

V POSITION

Controls the vertical position of the image within the Display area of the LCD.

-

All inputs except DVI, HDMI, DPORT

Press + to move up. Press - to move down.

CLOCK

Press + to expand the width of the image on the right of the screen.

-

VGA, RGB/HV inputs only

Press - to narrow the width of the image on the left.

CLOCK PHASE

Adjusts the visual “noise” on the image.

-

VGA, RGB/HV, DVD/HD1, DVD/HD2, SCART inputs only

*: The product you purchased may not have this feature.

*2: depends on signal input

  PICTURE

  ADJUST

setting)

Summary of Contents for MultiSync X461UNV











































Reviews: