background image

English-68

Reduced Footprint: 

Provides the ideal solution for environments with superior image quality.

SPECTRAVIEW ENGINE: 

This system is designed for improvement the visual quality of the monitor.

Each monitor is calibrated at the factory. By making automatic adjustments during operation of the monitor hardware in real 
time, optimal settings are configured without any user interaction.

Natural Color Matrix:

 Combines Six-axis color control and the sRGB standard. Six-axis color control permits color adjustments 

via six axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B) previously available. The sRGB standard 
provides the monitor with a uniform color profile. This ensures that the colors displayed on the monitor are exactly the same as 
on the color printout (with sRGB supporting operating system and sRGB printer). This allows you to adjust the colors on your 
screen and customise the color accuracy of your monitor to a variety of standards.

sRGB Color Control: 

A color management standard which allows for color matching on computer monitors and other 

peripherals. The sRGB standard, which is based on a calibrated color space, allows for optimal color representation and 
backward compatibility with other common color standards.

OSD (On-Screen-Display) Controls:

 Allows you to quickly and easily adjust all elements of your screen image via easy to use 

on-screen menus.

Plug and Play: 

The Microsoft

®

 solution with the Windows

®

 operating system facilitates setup and installation by allowing 

the monitor to send its

 

capabilities (such as screen size and resolutions supported) directly to your computer, automatically 

optimizing display performance.

IPM (Intelligent Power Manager) System: 

Provides innovative power-saving methods that allow the monitor to shift to a 

lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and 
lowering the air conditioning costs of the workplace.

FullScan Capability: 

Allows you to use the entire screen area in most resolutions, significantly expanding image size.

VESA Standard (FDMIv1) Mounting Interface: 

Allows you to mount the monitor to any VESA standard (FDMIv1) third party 

mounting arm or bracket. NEC recommends using mounting equipment which complies with TÜV-GS (Germany) and/or UL1678 
standard (North America).

ZOOM: 

Expands/reduces the image size in horizontal and vertical direction.

Self-diagnosis: 

If an internal error should occur, a failure state will be indicated.

USB hub:

 Allows the connection of digital cameras, scanners, keyboards and more.

HDCP (High-bandwidth Digital Content Protection):

 HDCP is a system for preventing illegal copying of video data sent over 

a digital signal. If you are unable to view material via the digital input, this does not necessarily mean that the monitor is not 
functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected by HDCP and 
might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).

Option Board slot: 

You can use an Option Board. Please contact your supplier for detailed information.

DICOM Sim.:

 A DICOM gamma curve emulation which is stored inside the monitor as fixed Look Up Table values. When 

selecting DICOM Sim., these values are loaded into the active Look Up Table of the monitor to create a DICOM like gamma 
correction curve. Suitable for DICOM image viewing in clinical review. Must not be used for DICOM image viewing in 
diagnostics. 

TILE MATRIX, TILE COMP: 

Shows one image over multiple screens with accuracy while compensating for bezel width.

Features

Summary of Contents for MultiSync V554Q-R













































































Reviews: