English
English−119
CONTROL MENU
KEY LOCK SETTINGS
Prevents the monitor from being controlled by the button on the monitor.
When [ACTIVATE] is selected, all of the settings are activated.
NOTE:
• [KEY LOCK SETTINGS] is a function intended only for the buttons of the monitor. This function
does not lock out access to the buttons on the remote control.
• To activate the control key lock function, press the
button and the
button and hold down
simultaneously for more than 3 seconds. To resume user mode, press the
button and the
button and hold simultaneously for more than 3 seconds.
MODE SELECT
Selects the mode [UNLOCK], [ALL LOCK] or [CUSTOM LOCK].
UNLOCK
All buttons are available for normal operations.
ALL LOCK
Locks all buttons on the monitor control panel.
CUSTOM LOCK
All buttons on the monitor are locked except for the following buttons, which can be individually set to be
locked or unlocked.
POWER:
Select [UNLOCK] to be able to use the button when buttons on the monitor
are locked. Select [LOCK] to lock the button.
VOLUME:
Select [UNLOCK] to be able to control the volume with the + and the - button
when the button on the monitor is locked. The volume can only be adjusted
within the range set for MIN VOL and MAX VOL.
Select [LOCK] to prevent volume adjustment.
MIN VOL and MAX VOL:
The volume buttons are unlocked and the volume level can only be adjusted
within the MIN and MAX range set. VOLUME must be set to [UNLOCK] for this
function.
INPUT:
Select [UNLOCK] to be able to use the INPUT/SET button when buttons on the
monitor are locked. Select [LOCK] to lock the buttons.
CHANNEL:
Select [UNLOCK] to be able to change channels with the
and the
buttons
when buttons on the monitor are locked. Select [LOCK] to lock these buttons.
ACTIVATE / DEACTIVATE:
Select [ACTIVATE] to activate all settings. To return to normal operation,
press the
button and the
button and hold simultaneously for more than
3 seconds.
DDC/CI
DisplayPort2, DVI, VGA (RGB)
inputs only
ENABLE/DISABLE: Turns [ON] or [OFF] the two-way communication and control of the monitor.
PING
Confirm successful connection with the network by communicating with a preset IP address.
IP ADDRESS
Sets an [IP ADDRESS] for sending [PING].
EXECUTE
Checks a reply can be sent to the monitor or not from the [IP ADDRESS] by sending [PING].
IP ADDRESS RESET
Resets [IP ADDRESS SETTINGS] back to factory settings.
AUTO DIMMING
Adjusts the backlight of the LCD automatically depending on the amount of ambient light.
AUTO BRIGHTNESS
*2
DVI, DisplayPort1, DisplayPort2,
VGA (RGB), MP, OPTION*
3
inputs only
Adjusts the brightness level according to the input signal.
NOTE: Do not select this function when [ROOM LIGHT SENSING] function is any setting other than [OFF].
BACKLIGHT DIMMING
(Not available)
*
2
: The function is available only when connecting the optional sensor unit.
*
3
: When you select [OPTION] for signal input, this function depends on which Option Board installed in the monitor.