English-16
HOT KEY
You can adjust the VOLUME and PICTURE MODE directly. When this function is set to ON, you can adjust the
VOLUME with “LEFT” or “RIGHT”, you can select the PICTURE MODE with “UP” or “DOWN”, while the OSD menu
is off. The standard OSD can be accessed with the MENU button. When this function is set to OFF, some buttons are
disabled (see page 11).
FACTORY PRESET
Selecting FACTORY PRESET allows you to reset all OSD control settings (except VIDEO DETECT, LANGUAGE,
OSD LOCK OUT, OSD COLOR, RESOLUTION NOTIFIER, HOT KEY) back to the factory settings. Individual settings
can be reset by highlighting the control in the OSD menu to be reset and pressing the RESET button.
NOTE:
If you want to reset the Picture calibration settings, please use FACTORY PRESET in the Advanced OSD
menu (see page 23).
ECO Information
CARBON SAVINGS:
Displays the estimated carbon savings information in kg.
CARBON USAGE:
Displays the estimated carbon usage information in kg.
This is the arithmetic estimation, not actual measurement value.
This estimation is based without any options.
COST SAVINGS:
Displays the electricity cost savings in balance.
CARBON CONVERT SETTING:
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting
is based on the OECD (2008 Edition).
CURRENCY SETTING:
Displays electricity pricing in 6 currency units.
CURRENCY CONVERT SETTING:
Displays electricity savings in kW/hour (US Currency is default).
NOTE:
This model’s initial setting is “Currency = US$” and its Currency Convert setting = $0.11.
This setting can be changed by using the ECO information menu.
If you want to use the French setting, please refer to the steps below:
1. Press the Menu button and select the ECO information menu using the “LEFT” or “RIGHT” button.
2. Select the CURRENCY SETTING item by pressing the “UP” or “DOWN” button.
3. The French currency unit is Euro ( ). You can adjust currency setting to Euro icon ( ) from US dollar ($)
by pressing the “LEFT” or “RIGHT” button in Current setting item.
4. Select CURRENCY CONVERT SETTING by pressing the “UP” or “DOWN” button.
This initial Euro ( ) setting is based on the OECD data for Germany (2007 Edition).
Please check the receipt of electricity prices for France or the OECD data for France.
The French value according to the OECD data (2007 Edition) was 0.12.
5. Adjust CURRENCY CONVERT SETTING by pressing the “LEFT” or “RIGHT” button.
Information
Provides information about the current display resolution (Main picture), current USB input setting and technical data
including the preset timing being used and the horizontal and vertical frequencies. Indicates the model and serial
numbers of your monitor.
OSD Warning
OSD Warning messages close when pressing the EXIT button.
NO SIGNAL:
This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on or
when there is a change of input signal, the
No Signal
window will appear. You can set below OSD menus:
- OFF MODE (see page 15): Select from OFF/STANDARD/ADVANCED/OPTION.
- DIGITAL LONG CABLE (see page 20): Select compensation level. Lower number produces less compensation.
- ANALOG DETECT (see page 24): Select from SEP/COMP or SOG.
RESOLUTION NOTIFIER:
This function warns if resolution other than the optimized resolution is used. After power is
turned on, or when there is a change of input signal, or the video signal doesn’t have proper resolution, the
Resolution
Notifier
window will open. This function can be disabled in the MENU Tools.
OUT OF RANGE:
This function gives a recommendation of the optimized resolution and refresh rate. After the power
is turned on, or there is a change of input signal, or if the video signal doesn’t have proper timing, the
Out Of Range
menu will appear.
If you need detailed information about the controls, please use the Advanced OSD menu.
