English−7
Installing an Option Board
You can install Option Boards that are compatible with Intel
®
Smart Display Module Small (Intel
®
SDM-S) and Intel
®
Smart
Display Module Large (Intel
®
SDM-L) specifications.
1. Turn off the main power switch.
2. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily
support the weight of the monitor.
OTEE:
To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s
screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can
damage the monitor.
3. Remove the SLOT COVER
a
and
b
, and then the OPTION COVER
a
(
Figure 1).
When using Intel
®
SDM-L type option board, slide the CENTER RAIL to the right and remove it. Reverse the process to re-
attach it (
Figure 1-1).
4. Attach the included OPTION COVER
b
with the removed screws (
Figure 2).
Figure 1
SLOT COVER
OPTION COVER
Figure 1-1
CENTER RAIL
Figure 2
Intel
®
SDM-S
Intel
®
SDM-L
Raspberry Pi Compute Module
5. Insert the Option Board into the monitor and affix it in place with the removed screws (
Figure 2).
(Recommended fasten force: 50 - 80 N•cm).