background image

English−3

WARNING

9

Prevent tipping and falling for earthquakes or other shocks.

To prevent personal injury or damage to the product caused by tipping over due to earthquakes or 
other shocks, make sure to install the product in a stable location and take measures to prevent 
falling.

The measures to prevent falling and tipping are intended for reducing the risk of injury, but may not 
guarantee the effectiveness against all earthquakes.

The product may tip causing personal injury.
•  When using the product with the optional table top stand, fasten the product to a wall using a 

cord or chain that can support the weight of the product in order to prevent the product from 
falling. Fasten the cord or chain to the product using the clamps and screws provided with the 
product or the table top stand.  
Depending on the table top stand, the stand has the structure for preventing tipping. 
Please refer to the table top stand manual.

•  Be sure to remove the cord or chain from the wall before moving the product to prevent personal 

injury or damage to the product.

The product may fall causing personal injury.
•  Do not attempt to hang the product using an installation safety wire.

•  Please install the product in an area on the wall or ceiling strong enough to support the weight of 

the product.

•  Prepare the product using mounting accessories, such as hook, eyebolt, or mounting parts, and 

then secure the product with a safety wire. The safety wire must not be tight.

•  Please make sure the mounting accessories are strong enough to support the product weight 

and size before installing it.

Stability Hazard.

The product may fall, causing serious personal injury or death. To prevent injury, this product must be 
securely attached to the floor/wall in accordance with the installation instructions.

Many injuries, particularly to children, can be avoided by taking simple precautions such as:

•  ALWAYS use stands or installation methods recommended by the manufacturer of the product 

set.

•  ALWAYS use furniture that can safely support the product.

•  ALWAYS ensure the product is not overhanging the edge of the supporting furniture.

•  ALWAYS educate children about the dangers of climbing on furniture to reach the product or its 

controls.

•  ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled 

or grabbed.

•  NEVER place a product in an unstable location.

•  NEVER place the product on tall furniture (for example, cupboards or bookcases) without 

anchoring both the furniture and the product to a suitable support.

•  NEVER place the product on cloth or other materials that may be located between the product 

and supporting furniture.

•  NEVER place items that might tempt children to climb, such as toys and remote controls, on the 

top of the product or furniture on which the product is placed.

•  If the existing product is going to be retained and relocated, the same considerations as above 

should be applied.

Summary of Contents for MultiSync ME Series










Reviews: