English-21
English
OSD ROTATION
AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is
set to AUTO by default.
LANDSCAPE: Display the OSD with landscape mode.
PORTRAIT: Display the OSD with portrait mode.
IMAGE ROTATION
AUTO: The main window image automatically rotates according to the orientation of the
display. If “AUTO” is selected in the “OSD ROTATION” menu, the main window image
rotates according to the orientation of the monitor.
OFF: The main window image is not rotated. IMAGE ROTATION is set to OFF by default.
ON: The main window image always rotated.
Note: This function is effective only if PICTURE BY PICTURE-ASPECT or PICTURE BY
PICTURE-FULL.
SUB IMAGE
ROTATION
AUTO: The sub window image automatically rotates according to the orientation of the
display. If “AUTO” is selected in the “OSD ROTATION” menu, the sub window image
rotates according to the orientation of the monitor.
OFF: The sub window image is not rotated. IMAGE ROTATION is set to OFF by default.
ON: The sub window image always rotated.
DDC/CI
DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and control with
connected PC by video cable.
NOTE: Set DDC/CI to ENABLE when using hardware calibration software like
MultiProfi ler over DisplayPort, DVI or VGA.
SCREEN SAVER
Use the SCREEN SAVER to reduce the risk of image persistence.
MOTION (Default OFF): Screen image moves periodically in 4 directions in order to
reduce the risk of image retention.
Timing for MOTION can be set so the screen image moves in intervals from every
10 to 900 seconds. Timing is set in 10-second increments.
OPTION (Default REDUCED): There are two optional selections.
REDUCED: Screen image is reduced to 95% size and is moved periodically in
4 directions. Screen may appear slightly less sharp than normal. The full image appears
on the display.
NOTE: Some input signals may not be supported by REDUCED.
FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screen
image goes outside of the display area in the direction that it shifts so that a portion of the
image may appear to be cut off.
NOTE: SCREEN SAVER works when ENABLE is OFF in TILE MATRIX and PIP MODE
is OFF.
Tag9
Not adjustable
TagA
TILE MATRIX
The Tile Matrix feature allows one image to be displayed over multiple screens. This
feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using Tile Matrix
requires the PC output signal be sent through a distribution amplifi er to each individual
monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with Tile Matrix to compensate for the width of the tile
bezels in order to accurately display the image.
Tile Comp with 4 monitors (black area shows monitor frames):
monitor1
monitor2
monitor3
monitor4
monitor1
monitor2
monitor3
monitor4
Tile Comp ON
Tile Comp OFF
NOTE: TILE MATRIX works only when PIP MODE is OFF.