7
Long Cable Compensation Adjustment
To perform the long cable compensation adjustment, use the following steps:
Set the Auto Adjust Level (Auto SW) to “DETAIL” in the Advanced OSM
To enter the Advanced OSM
• Turn off your monitor.
• Turn on your monitor by pressing the “POWER” and “SELECT” buttons
simultaneously to open the Advanced OSM menu.
To exit the Advanced OSM
• Turn off and restart your monitor.
Perform “AUTO ADJUST” by using
OSM AUTO.
• Press select to adjust.
• For additional information on user
controls and software utilities, visit our
website at www.necdisplay.com
SIMPLE
X
FULL
X
DETAIL
"Size" "Fine"
"Position"
O
O
O
X
O
O
O
1.5 seconds
2 seconds
10 to 20 seconds
Time
"Contrast"
Long cable capability *1
Black Level,
O
: Automatic adjustment is performed.
X
: Automatic adjustment is not performed.
*1
: Black level, RGB sharpness, RGB delay and RGB position are adjusted using Long Cable Software (included).
Quick Start
–continued
LCD2080UXimanual_053105.pmd
6/2/05, 2:51 PM
7
Summary of Contents for MultiSync LCD2080UXi
Page 1: ...MultiSync LCD2080UXi TM ...
