4-6
5.2.2 How to Use Service Mode
Page1:
This page is used to check user’s HOURS RUNNING and
system’s total HOURS RUNNING.
1. Press “SELECT” to move cursor on HOURS RUNNING.
2. Press “
3
(LEFT)” + ”RESET” at the same time to check HOURS RUNNING.
3. Press ”
6
(DOWN)” or ”
5
(UP)” to move cursor to FACTORY PRESET.
4. Press, “SELECT” to reset all function to initial status (include user’s HOURS RUNNING and
AUTO INFORMATION).
HOURS RUNNING
This Indicates On time and Off mode (power save) time (hours, minutes).
There are two timers.
RESETTABLE:
Display Reset-able timers.
UNRESETTABLE:
Display Un reset-able timers.
The following key operation changes the timer indication.
Select “HOURS RUNNING”.
Press, “
8
(RIGHT)” + “RESET”:
Display Un reset-able timers.
Press, “
3
(LEFT)” + “RESET”:
Display Reset-able timers.
Press, “
3
(LEFT)” + “
8
(RIGHT)” + “RESET”:
Timer is cleared
The indicated number will change every 5minutes.
On mode time:
xxxH xxM
Off Mode time:
xxxH xxM
F/W ID and F/W VER.
Indicate Firmware ID and Firmware version.
F/W ID (LCD1970NX): C59SLP10
FACTORY RESET
When the proceed key is pushed during Factory reset, Hours Running and Auto Count is cleared.
