background image

English-14

sRGB

sRGB mode dramatically improves the colour fidelity in
the desktop environment by a single standard RGB
colour space. With this colour supported environment,
the operator could easily and confidently communicate
colours without further colour management overhead in
the most common situations.

NATIVE

Original colour presented by the LCD panel that is
unadjustable.

Tools

LANGUAGE

OSM control menus are available in seven languages.

OSM POSITION

You can choose where you would like the OSM control
image to appear on your screen. Selecting OSM
Location allows you to manually adjust the position of
the OSM control menu left, right, down or up.

OSM TURN  OFF

The OSM control menu will stay on as long as it is use.
In the OSM Turn Off submenu, you can select how long
the monitor waits after the last touch of a button to shut
off the OSM control menu. The preset choices are 10,
20, 30, 45, 60 and 120 seconds.

OSM LOCK OUT

This control completely locks out access to all OSM
control functions. When attempting to activate OSM
controls while in the Lock Out mode, a screen will
appear indicating the OSM controls are locked out.
To activate the OSM Lock Out function, press  , then 
and hold down simultaneously. To de-activate the OSM
Lock Out, press  , then   and hold down
simultaneously.

RESOLUTION NOTIFIER

This optimal resolution is 1024 x 768. If ON is selected,
a message will appear on the screen after 30 seconds,
notifying you that the resolution is not at 1024 x 768.

Summary of Contents for MultiSync LCD1550M LCD1550M LCD1550M

































Reviews: