6
Quick Start
–continued
Figure R.3
Figure R.1
Tilt and swivel
Grasp both sides of the monitor screen with
your hands and adjust the tilt and swivel as
desired (
Figure TS.1
)
.
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting
purposes:
1. Remove the connector cover and the
cable cover
(Figure R.1)
.
2. Disconnect all cables.
3. Place monitor face down on a
non-abrasive surface
(Figure
R.2)
.
4. Remove the 4 screws
connecting the monitor to the
stand and lift off the stand
assembly
(Figure R.2)
.
The monitor is now ready for
mounting in an alternate
manner.
5. Connect the AC cord, signal cable and Audio cable to the back of the
monitor
(Figure R.3)
.
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
When the monitor stand is removed, the USB capabilities will be disabled.
Figure TS.1
Figure R.2
Non-abrasive
surface
Summary of Contents for MultiSync LA-15R03-BK
Page 1: ...1550M ...