NEC MultiSync FP2141SB, User Manual

Page: 7 / 76

5
OSM
™
(On-Screen Manager) control buttons on the front of the monitor function
as follows:
Main Menu Sub-Menu
EXIT Exits the OSM menu. Exits to the OSM controls
main menu.
Note :
Deactivates the OSM menu and activates the OSM menu when the OSM is turned off.
CONTROL Moves the highlighted Moves the highlighted area
area left/right to select left/right to select one of the
one of the sub-menu. controls.
Note : When the OSM menu is off, it acts as a Hot key for Brightness .
CONTROL
Has no function Moves the bar in the – or +
+/–
direction to decrease or
increase the adjustment.
Note : Deactivates the OSM menu and to adjust
Contrast
with
Hot key
set “ON”
SELECT/ Enters sub-menu. Has no function.
SB MODE
When the OSM is off, it will act as the SuperBright (SB) function key. User can
select between SB MODE OFF, SB MODE1, and SB MODE2. The first time this
key is pressed, the current SB Mode is indicated. Within a 3 second window, if
this key is selected again, the SB MODE will change to the next SB MODE. For
example, the current mode is SB MODE OFF, the key is pressed twice within a 3
second time frame, the SB MODE will change to SB MODE1 and so on. The
color temperature at each SB Mode is adjusted by appropriate color control
except for the sRGB mode whose color setting cannot be adjusted. When the unit
is turned off, it will reset to SB off mode.
RESET
Resets all the controls within the Resets the highlighted control to
highlighted menu to the factory the factory setting.
setting.
Note: Deactivates the OSM menu and Hot Key for input connector (INPUT 1 2).
Note: When RESET is pressed in the main and sub-menu, a warning window will
appear allowing you to select the reset function.
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen brightness.
Contrast: Adjusts the image brightness in relation to the background.
Degauss:
Eliminates the buildup of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus and convergence. When
activated, your screen image will jump and waver a bit as the screen is demagnetized.
NOTE: Please allow a minimum of 20 minutes to elapse between uses of the Degauss Control.
Constant Brightness: sustains the brightness and screen color levels consistently over the
normal life of the monitor. The Constant Brightness function requires a 30 minute warm-
up of the monitor before the feature is fully functional.
Controls