English-8
8. Turn on the computer and then the monitor by touching the power key on the front bezel (
Figure E.1
).
9. No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. For further adjustments, use
the following OSD controls:
•
AUTO CONTRAST (Analog input only)
•
AUTO ADJUST (Analog input only)
Refer to the
Controls
section of this User’s Manual for a full description of these OSD controls.
NOTE:
If you have any problems, please refer to the
Troubleshooting
section of this User’s Manual.
Figure E.1
Power key
Adjustable stand with pivot capability
Raise and Lower: Hold the monitor on each side and lift or lower to the desired height.
Tilt and Swivel: Hold the top and bottom sides of the monitor screen with your hands and adjust the tilt and swivel as desired.
Screen Rotation (Pivot): Hold the monitor on each side and turn it from landscape to portrait.
You can adjust the OSD menu rotation to match the screen rotation. Refer to the OSD ROTATION instructions (see
page 18
).
Tilt and Swivel
Rotation, Raise and Lower
CAUTION:
Handle with care when adjusting the monitor screen. Do not apply pressure to the LCD when adjusting the
height and rotating the monitor screen.
Before rotating, disconnect power cord and all cables from the display, then the screen must be raised to the
highest level and tilt to avoid knocking the screen on the desk or pinching your fingers.
