OSM LOCK OUT: This control completely locks out access to all OSM
functions except brightness and contrast controls. When attempting to
activate OSM while in the lockout mode, a screen will appear indicating
that OSM is locked out. To activate the OSM Lockout function, press
PROCEED, then press “
▲
” and hold down simultaneously. To
de-activate the OSM Lockout, press PROCEED, then press “
▲
” and hold
down simultaneously.
IPM: Using this function the OFF MODE of the IPM can be disabled.
–
ENABLE: The IPM works normally, all four stages of the energy
saving are used.
–
DISABLE: The OFF MODE of the IPM is not used.
For standard computers and graphics boards you should keep the factory
setting ENABLE.
REFRESH NOTIFIER: A message will advise you if the refresh rate is
too low. For further information, please refer to your display card or
system manual. Factory setting is OFF .
Information
Provides you with additional information which includes the following:
DISPLAY MODE: Indicates the current mode and frequency setting of
the monitor.
MONITOR INFO: Indicates the model number and the serial number.
B
G
R
MODE
FREQUENCY
HORIZONTAL
VERTICAL
POLARITY
HORIZONTAL
VERTICAL
3
31.60 KHZ
60.00 HZ
POS.
NEG.
OSM Menus
E - 15
Summary of Contents for MULTISYNC E900+
