NEC MOBILEPRO 900, User Manual

Page: 34 / 132

1-26 Getting Started
Connecting to Your PC via Infrared Port
If your host PC is not equipped with a USB port or serial port or these
ports are in use, use the infrared port to synchronize the MobilePro
with your host PC.
The information in the following section provides an overview of the
synchronization process using the infrared port, followed by detailed
instructions for each stage of the process.
Follow these procedures to configure your MobilePro for
synchronization using the infrared port.
!
Modify the PC Connection default settings on your MobilePro.
!
Set the infrared connection speed.
! Enable the infrared port on your host PC.
!
Install Microsoft ActiveSync on your host PC.
!
Create a partnership between your host PC and your MobilePro.
!
Verify that the desired synchronization services are configured.
Modifying PC Connection Settings
Your MobilePro ships with PC Connection default settings. Follow
these steps to modify the PC connection settings.
1. Tap Start, Settings, Control Panel, Communications.
2. Select the PC Connection tab.
3.
Select the Change tab, use the dropdown box to change the setting
to Infrared port, and click OK.
Proceed to the next section to set the infrared connection speed, if
necessary.