Getting Started 1-15
3.
In the IP address tab, select (place a dot beside)
"Obtain an IP address via DCHP."
4.
Select the Name Servers tab and enter the host PC's
IP address in the "Primary WINS" field.
To identify the host PC's IP address, run an IP con-
fig utility. InWindows 98 and 95, run Win IP Con-
fig. In Windows NT, run IP Config. If you need
assistance, see your network administrator.
Installing ActiveSync
Follow these steps to install Microsoft ActiveSync for syn-
chronization with Microsoft Outlook. The installation se-
quence may vary depending upon the Microsoft
components installed on your host PC.
Note:
If your host PC uses the Windows NT
operating system, you must install Windows NT
Networking before installing Microsoft ActiveSync to
your host PC.
1.
Insert the Microsoft ActiveSync CD in the CD-ROM
reader of your host PC.
!"
If auto insert is enabled on your host PC, the setup
window appears.
!"
If auto insert is not enabled, go to Start, Run, browse
for the CD-ROM drive, and run the setup.exe file.
2.
Click Next to start the setup wizard.
The Selection Installation folder appears.
3.
Click Next to accept the default installation folder or
modify the folder destination and click Next.
The Get Connected window appears.
