7. Connecting to a Network
97
2
Connecting to MultiPresenter
Preparations:
• When connecting the projector to a wired LAN, connect a LAN cable to the projector. (
→
)
• When connecting the projector to a wireless LAN, install a separately-sold (or the enclosed) LAN unit (NP05LM)
in the projector. (
→
)
• Configure the NETWORK SETTINGS of the projector. (
→
page
• Install the MultiPresenter app in the computer or tablet terminal.
https://www.nec-display.com/dl/en/soft/multipresenter/index.html
The procedure is described here for each wireless LAN profile “INTELLIGENT CONNECTION”, “INFRASTRUCTURE”,
and “SIMPLE ACCESS POINT”.
①
When connecting with an INTELLIGENT CONNECTION
1. Turn on the power of the projector and press the APPS button on the remote control.
The start-up screen of MultiPresenter is displayed.
2. Start MultiPresenter.
The target device screen is displayed.
3. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal is projected on
the screen.
