English-16
Information
DISPLAY MODE
Provides information about the current resolution
display and technical data including the preset timing
being used and the horizontal and vertical frequencies.
Increases or decreases the current resolution. (Analog
input only)
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSM Warning
OSM Warning menus disappear with Exit button.
NO SIGNAL:
This function gives a warning when there
is no Horizontal or Vertical Sync Signal present and
advises you to check all Video Inputs on the monitor
and computer to make sure they are properly
connected. After power is turned on or when there is a
change of input signal or video is inactive, the
No
Signal
window will appear.
RESOLUTION NOTIFIER:
This function gives a
warning of use with optimized resolution. After power is
turned on or when there is a change of input signal or
the video signal doesn’t have proper resolution, the
Resolution Notifier
window will open. This function
can be disabled in the TOOL menu.
OUT OF RANGE:
This function gives a
recommendation of the optimized resolution and refresh
rate. After the power is turned on or there is a change of
input signal or the video signal doesn’t have proper
timing, the
Out Of Range
menu will appear.
NOTE:
If “ CHANGE DVI SELECTION” is displayed, switch to
DVI SELECTION.
