NEC LT150 - MultiSync XGA DLP Projector User Manual Download

Page: 6 / 62

E–3

Important Safeguards

These safety instructions are to ensure the long life of
your projector and to prevent fire and shock. Please read
them carefully and heed all warnings.

Installation

1. For best results, use your projector in a darkened room.

2. Place the projector on a flat, level surface in a dry area away

from dust and moisture.

3. Do not place your projector in direct sunlight, near heaters

or heat radiating appliances.

4. Exposure to direct sunlight, smoke or steam can harm in-

ternal components.

5. Handle your projector carefully. Dropping or jarring can dam-

age internal components.

6. Do not place heavy objects on top of the projector.

7. If you wish to have the projector installed on the ceiling:

a. Do not attempt to install the projector yourself.

b. The projector must be installed by qualified technicians in order

to ensure proper operation and reduce the risk of bodily injury.

c. In addition, the ceiling must be strong enough to support the

projector and the installation must be in accordance with any
local building codes.

d. Please consult your dealer for more information.

Power Supply

1. The projector is designed to operate on a power supply of

100-120 or 200-240 V 50/60 Hz AC. Ensure that your power
supply fits this requirement before attempting to use your
projector.

2. Handle the power cable carefully and avoid excessive bend-

ing. A damaged cord can cause electric shock or fire.

3. If the projector is not to be used for an extended period of

time, disconnect the plug from the power outlet.

CAUTION

Do not unplug the power cable from the wall outlet under any
one of the following circumstances. Doing so can cause damage
to the projector:

* While the Hour Glass icon appears.
* While the message "Please wait a little." appears. This mes-

sage will be displayed after the projector is turned off.

* Immediately after the power cable is plugged into the wall

outlet (the POWER indicator has not changed to a steady amber
glow).

* Immediately after the cooling fan stops working (The cooling

fan continues to work for 90 seconds after the projector is
turned off with the POWER button).

* While the POWER and the STATUS indicators are alternately

flashing.

Summary of Contents for LT150 - MultiSync XGA DLP Projector































































Search results

Summary of Contents for LT150 - MultiSync XGA DLP Projector

Reviews:

Related manuals for LT150 - MultiSync XGA DLP Projector

Brands by name

Popular brands

NEC LT150 - MultiSync XGA DLP Projector, User Manual

Search results

Summary of Contents for LT150 - MultiSync XGA DLP Projector

Reviews:

Related manuals for LT150 - MultiSync XGA DLP Projector

Brands by name

Popular brands