E–14
1. Infrared Transmitter
Direct the remote control toward the remote sensor on the projec-
tor cabinet.
2. Laser Pointer
Beams a laser light when "Laser" button is pressed.
3. LED
Flashes when any button is pressed.
4. Power On Button
If the main power is applied, you can use this button to turn your
projector on.
5. Power Off Button
If the main power is applied, you can use this button to turn your
projector off.
NOTE: To turn off the projector, press and hold the POWER OFF button for
a minimum of two seconds.
6. Video Button
Press this button to select an NTSC, PAL, SECAM or NTSC4.43
compatible video source from a VCR, DVD player, laser disc player
or document camera.
7. S-Video Button
Press this button to select an S-Video source from a VCR.
8. RGB 1 Button
Press this button to select a video source from computer or compo-
nent equipment connected to your RGB port.
9. RGB 2 Button
Not available on this model.
10. Auto Adjust Button (RGB only)
Press this button to automatically adjust the vertical/horizontal po-
sition, clock frequency/phase and resolution if the projected pic-
ture is not centered, if there are vertical stripes on the picture or if
the picture is flickering.
11. PJ Button
Press this button to switch the Mouse, Cancel/Right Click, and
Enter/Left Click buttons between the Projector mode (lit red) and
the Computer mode. Press this button or any one of the Menu,
Help, Pointer, PC Card, Folder List or Slide List buttons to switch
to the Projector mode and the PJ button lights red. To switch back
to the Computer mode, press the PJ button again.
12. Laser Button
Press and hold this button to activate the laser pointer. When lit,
you can use the laser to draw your audience's attention to a red dot
that you can place on any object.
13. Menu Button
Displays the menu for various settings and adjustments.
14. Mouse (
▲▼
䊴 䊳
) / (+) (–) Button
When you are in the Computer mode, these buttons work as a com-
puter mouse.
1
2
KEYSTONE
FREEZE
PIC-MUTE
HELP
POINTER PC CARD
VIDEO
S-VIDEO AUTO ADJ.
RGB 1
MENU
LASER
R-CLICK /CANCEL
RGB 2
PJ
ON
OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
3
5
4
10
11*
12
9
6
8
7
13*
14
Optional Presentation Remote Control (PR50KIT)
The PR50KIT enables your NEC projector and presentation control
with the same remote.
NOTE: If you are using a Macintosh computer, you can click either the right-
click or left-click button to activate the mouse.
NOTE: If any one of the buttons is pressed and held for 60 seconds or more,
the button operations will cease to operate. This is not a malfunction, rather it
is a feature used to prolong battery power.
To cancel this feature, press any one of the buttons other than the Mouse
button.
