NEC LL009F, User Manual

Page: 59 / 123

- 59 -
4.8 Rebooting the Autoloader
The drive and Autoloader can be rebooted using the following menus.
Caution:
If a reset is executed without first executing the following steps, the device and/or
cartridge may be damaged, and data may be lost.
A reboot (initialization) is required in the following cases.
•
When a system administrator or maintenance engineer has ordered a reboot of the
Autoloader
•
When errors have occurred in the Accessor and/or drive.
The following describes the steps for rebooting the drive. Similar steps can be performed to
reboot the Autoloader as well.
1) Make sure that all jobs have been completed.
2) Log in.
3) Select [COMMANDS].
4) Select [REBOOT DRIVE] from [COMMANDS].
5) Once this is selected, the following two messages will appear in alternation.
Press the button.
6) You will be asked to set the Autoloader's mode after rebooting to online or offline mode.
Select online to set online mode, or select offline to set offline mode.