background image

English-2

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE 

THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS 

CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL 

SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD 

FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric 

shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has 

been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION:

 Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied 

with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC voltage of the 
power outlet and has been approved by and complies with the safety standard of your particular country.

Plug type

North America

European

Continental

U.K.

Japanese

Plug shape

Region

U.S.A./Canada

EU (except U.K.)

U.K.

Japan

Voltage

120*

230

230

100

* When operating the video distributor LED-VD1 (D000LD) with its AC 125-240V power supply, use a power supply cord 

that matches the power supply voltage of the AC power outlet being used.

NOTE:

 This product can only be serviced in the country where it was purchased.

Summary of Contents for LED-VD1
















Reviews: