English
- 7
Parts Name and Functions
①
③
⑤
⑪
Front
Rear
⑦
⑩
⑧
⑨
⑫
④
②
⑥
Name
Description
Interface connectors
Input and output connectors for the signal and AC power.
12
Signal input/output
To input the signal from the LED controller or the previous LED module.
When a signal is input into
1
, the signal is output from
2
.
When a signal is input into
2
, the signal is output from
1
.
34
Signal input/output
Not functioning with this product.
56
Power input (output)
When AC power is input into
5
, AC power is output from
6
.
When AC power is input into
6
, AC power is output from
5
.
Do not input AC power into both
5
and
6
.
7
Status lamp (red)
Lights up when power is on.
8
Status lamp (blue)
Not functioning with this device.
9
Status lamp (green)
Flashes at intervals of approximately 4 seconds when no signal is input.
Flashes at intervals of about 1 second when a signal is being input.
0
Test button
Used to display the test patterns. The displayed pattern changes each
time the test button is pressed.
The signal from the LED controller must be interrupted to display a test
pattern.
!
Handle
Use the handles when carrying and installing the cabinet.
@
Guide pin
Used to align the cabinets when installing them on top of each other.
