12
Specifi cations
Monitor
LCD19WV
Notes
Specifi cations
Monitor
LCD Module
Diagonal:
19.0 inch
Active matrix; thin fi lm transistor (TFT)
Viewable Image Size:
19.0 inch
liquid crystal display (LCD); 0.285 mm dot
Native Resolution (Pixel Count):
1440 x 900
pitch; 300cd/m
2
white luminence;
1000:1 contrast ratio, typical;
Time
5ms
response
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:Separate sync TTL Level (Positive/Negtive)
Display Colors
Analog
input:
16.7M
Depending on display card used.
Maximum
Left/right:
80°/80° (CR>10)
Viewing Angles
Up/Down:
75°/85° (CR>10)
Synchronization
Horizontal:
30.0 kHz to 83.0 kHz
Automatically
Range
Vertical:
55 Hz to 75 Hz
Automatically
Resolutions Supported
720 x 400: at 70 Hz
Some systems may not support
640 x 480: 60 Hz to 75 Hz
all modes listed.
800 x 600: 56 Hz to 75 Hz
832 x 624: at 75 Hz
1024 x 768: 60 Hz to 75 Hz
1152 x 864: at 75Hz
1280 x 768: at 60 Hz
1280 x 960: at 60Hz
1280 x 1024: 60 Hz to 75 Hz
1440 x 900: at 60Hz.................................. NEC DISPLAY SOLUTIONS cites
recommended resolution at 60 Hz for
optimal display performance
Active Display Area
Horizontal :
410.4 mm/16.2 inches
Vertical :
256.5 mm/10.1 inches
Power Supply
100-240
V
- 50/60 Hz
Current Rating
0.75-0.4A/100-240V
Dimensions
440.0mm (W) x 363.0mm (H) x 210.0mm (D)
17.3 inches (W) x 14.3 inches (H) x 8.3 inches (D)
Weight
4.5 kg
9.9
lbs
Environmental Considerations
Operating Temperature:
5°C to 35°C/41°F to 95°F
Humidity:
30%
to
80%
Altitude:
0 to 12,000 Feet
Storage Temperature:
-10°C to +60°C/14°F to 140°F
Humidity:
10%
to
85%
Altitude:
0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current fl at panel technologies when displaying non-native resolutions full screen. In fl at panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifi cations are subject to change without notice.
Analog and
Digital Input: