background image

1-18 

English-16

Manufacturer’s Recycling and Energy Information

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the latest independent standards from agencies such as
ISO (International Organisation for Standardization).

For more information, and for help in recycling your old NEC monitors, please visit our website at

http://www.nec-display-solutions.com (in Europe) or

http://www.necdisplay.com (in USA).

Country-specific recycling programmes can also be found at:

Sweden -

http://www.el-retur.se

Germany -

http://www.recyclingpartner.de/

Holland -

http://www.mirec.nl/

Energy saving:

This monitor features an advanced energy saving capability. When a VESA Display Power Management Signaling (DPMS)
Standard signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.

Mode

Power consumption

LED colour

Normal Operation

Approx. 100W

Green

Energy Saving Mode

Less than 7W

Amber

Off Mode

Less than 0.1W

Unlit

Disposing of your old NEC product

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste electrical and
electronic products carrying the mark (left) must be disposed of separately from normal household
waste. This includes monitors and electrical accessories, such as signal cables or power cords.
When you need to dispose of your NEC display products, please follow the guidance of your local
authority, or ask the shop where you purchased the product, or if applicable, follow any agreements
made between yourself and NEC.

The mark on electrical and electronic products only applies to the current European Union Member
States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local
authority so as to comply with the correct disposal method.

 

Summary of Contents for LCD2180WGLEDBKSV - MultiSync - 21.3" LCD Monitor



















Reviews: