2
Controls
OSM
®
(On-Screen Manager) control buttons on the front of the monitor
function as follows:
To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right,
Down, Up).
To change signal input, press the SELECT button.
NOTE: OSM must be closed in order to change signal input.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO Contrast
(Analog input only)
Adjusts the image displayed to optimal settings.
DV MODE
(LCD2070NX, LCD2170NX only)
Allows you to select the suitable setting for Movie, Picture , etc.
Auto Adjust
(Analog input only)
Automatically adjusts the Image Position, H. Size and Fine settings.
Button
Menu
MENU/EXIT
Exits the OSM controls.
Returns to the OSM main menu.
Left/Right
Moves the highlighted area left/right to
select control menus.
Moves the bar left/right to increase or decrease the
adjustment.
Down/Up
Moves the highlighted area down/up to select one of
the controls.
SELECT
Active Auto Adjust function. Enter the OSM sub
menu.
RESET/DV MODE
(LCD2070NX, LCD270NX)
RESET
(LCD2070VX)
Resets the highlighted control menu to the factory
setting.
Enter the DV MODE.
(NX models only)
Activates NTAA function when the OSM is not
on-screen. Press and hold for 3 seconds to activate.
NOTE: When RESET is pressed in the main and sub-menu, a warning window
will appear allowing you to cancel the RESET function by pressing the MENU/
EXIT button.