NOTE: Technical specifications are subject to
change without notice.
All of these control capabilities are made possible using the advanced remote diagnostics
and remote control capabilities of the Display Data Channel/Command Interface (DDC/CI).
This allows control commands to be sent directly to the monitor by the local system or
remotely over an existing network (LAN) by a system administrator. In order to take full
advantage of these benefits, users must use a DDC/CI-compatible graphics card and be
running Windows 2000/XP.
Also controlled through the Advanced OSM is TileMatrix, which allows you to build video
walls of various configurations. With the use of a simple video amplifier and a standard
video card, this feature saves you time and money compared to other connection solutions.
With the ability to utilize up to 25 monitors (5 x 5 configuration) that display a shared
image, you can build an impressive video wall for various applications, including advertising
and tradeshows. TileComp works in tandem with TileMatrix to compensate for the width of
tiled bezels and optimally display still images.
Another user-controlled feature offered by the Advanced OSM is AutoBright, which adjusts
the brightness level based on the image content on the screen. This function delivers
optimal readability and reduced user eyestrain, as well as conserves energy, contributing
to a lower total cost of ownership.
Wide compatibility for today and tomorrow.
Ambix+™ technology provides the widest
range of computer video compatibilities between analog and digital systems by allowing the
same monitor to work seamlessly in either environment. The DVI-I connector provides
digital or analog input, the DVI-D connector provides digital-only input, and a third input is
provided with a traditional 15-pin VGA connector, which allows for legacy analog-only
connection. This tripleinterface architecture provides a number of single and dual-input
configurations.
Hassle-free display setup.
With Advanced No Touch Auto Adjust, the MultiSync LCD1980FXi
not only provides for an optimal image upon initial power-on but can also detect closed
signal changes even if it runs under the same resolution and refresh rate, as is the case
with external signal switch boxes. This results in a more stable image after switching. This
model also features auto DVI cable detection, which, upon power-up of your computer
system, allows it to identify which signal cable (analog or digital) is attached to the
monitor’s DVI-I connector. This technology eliminates many manual setup steps and
assures that your system and monitor configuration are achieving optimal performance.
Intelligent power management ensures a smart investment.
Using approximately 50%
less power and emitting less heat than comparable CRT monitors, the MultiSync LCD1980FXi
allows you to conserve energy and lower your total cost of ownership. Many technologies
contribute to these savings, including the automatic power-off timer, which can be set
from 1-24 hours via the on-screen display. If users forget to turn off their monitors, this
function will turn them off automatically after a user-determined period of time, thereby
reducing electrical power costs. The high-efficiency backlight, which provides the longest
lifetimes of any NEC LCD monitor, reduces not only the power consumption but also the
heat generation at the front of the screen.
OSM is a registered trademark, and Advanced No Touch Auto Adjust,
AmbiBright, Ambix+, AutoBright, GammaComp, NaViSet, Rapid Motion,
Rapid Response, TileMatrix, TileComp, X, are trademarks of
NEC Display Solutions of America, Inc. ENERGY STAR is a U.S. registered
trademark. All other brand or product names are trademarks or
registered trademarks of their respective holders.
©2005 NEC Display Solutions of America. 3/05 ver.1.
NEC Display Solutions of America, Inc.
500 Park Boulevard, Suite 1100
Itasca, IL 60143
888-NEC-MITS
www.necmitsubishi.com
Model
Display
Viewable
Image
Size
Pixel
Pitch
Pixels Per Inch
Brightness
(typical)
Contrast
Ratio
(typical)
Viewing
Angle
(typical)
Response Time (typical)
Display
Colors
Synchronization Range
Horizontal
Vertical
Input Signal
Video
Sync
Input
Resolutions Supported
Native Resolution
Additional Features
Touch/Protective Glass-Capable
Voltage Rating
Power Consumption (typical)
On
Power
Savings
Mode
Dimensions (W x H x D)
Net
(with
stand)
Net
(without
stand)
Weight
Net
(with
stand)
Net
(without
stand)
VESA Hole Configuration Specs.
Environmental Considerations
Operating
Temp.
Operating
Humidity
Operating
Altitude:
Storage
Temp.
Storage
Humidity
Storage
Altitude:
Limited Warranty
Technical Support
NEC MultiSync LCD1980FXi
19"/48.2 cm
0.294mm
86 @ native resolution
270 cd/m2
600:1
178° Vert., 178° Horiz. (89U/89D/89L/89R)
Rapid Response (18ms)
16.77 million
31.5 - 81.1 kHz
50 - 85 Hz
Analog 0.7 Vp-p/75 Ohms
Separate Sync: TTL Level (positive/negative)
Composite Sync: TTL Level
(positive/negative)
Composite Sync on Green (0.3 Vp-p negative
0.7 Vp-p positive)
DVI-I, DVI-D and VGA 15 pin D-sub
Analog/Digital:
720 x 400 @ 70 - 85 Hz
640 x 480 @ 60 - 85 Hz
800 x 600 @ 56 - 85 Hz
832 x 624 @ 75 Hz
1024 x 768 @ 60 - 85 Hz
1152 x 864 @ 70 - 85 Hz
1152 x 870 @ 75 Hz
1280 x 960 @ 60 Hz
1280 x 1024 @ 60 - 75 Hz
1280 x 1024 @ 60 Hz
Ultra-thin-frame (bezel), GammaComp,
TileMatrix, TileComp, X wide-angle
viewing technology, Ambix+ technology,
Advanced No Touch Auto Adjust, AutoBright,
CableComp, power-off timer, black level
adjustment, AmbiBright, digital smoothing,
digital controls, OmniColor 6-axis color
control sRGB, Plug and Play (VESA DDC2B &
2Bi), VESA DPMS power management, ISO
13406-2 Class II, vacation switch, optional
MultiSync SoundBar 80, height-adjustable
stand, Rapid Motion
Designed for integration
Universal 100 (110-240V) 50-60 Hz internal
48W
<2W
402.3 x 364.8 x 200mm / 15.8 x 14.4 x 7.9 in.
402.3 x 330.3 x 77.5mm / 15.8 x 13 x 3.1 in.
21.4 lbs/9.7 kg
13.9 lbs/6.3 kg
100mm x 100mm
5-35°C/41-95°F
30-80%
3048 m/10,000 ft
-10-60°C/14-140°F
10-85%
12,192 m/40,000 ft
3 years parts and labor, including backlight
24 hours/7 days
