3
To unfold stand, follow these instructions:
. Place monitor face down on a non-abrasive surface
(Figure 1)
.
2. Pull the stand holding the monitor with the other hand until the stand clicks.
NOTE:
Handle with care when pulling the stand.
NOTE:
Reverse process to re-pack monitor.
To attach the MultiSync LCD monitor to your system, follow these instructions:
. Turn off the power to your computer.
2. For the PC or MAC with DVI digital output: Connect the DVI signal cable (not
included) to the connector of the display card in your system (
Figure A.1
). Tighten
all screws.
For the PC with Analog output: Connect the 5-pin mini D-SUB signal cable to the
connector of the display card in your system
(Figure A.2)
. Tighten all screws.
For the MAC: Connect the MultiSync Macintosh cable adapter to the computer,
then attach the 5-pin mini D-SUB signal cable to the MultiSync Macintosh cable
adapter (not included)
(Figure A.3)
. Tighten all screws.
NOTE:
To obtain the MultiSync Macintosh cable adapter, call
NEC Display Solutions of America, Inc. at (800) 632-4662.
Quick Start
Figure
Figure 2
Figure A.2
Figure A.3
Figure A.
DVI Signal Cable
(not included)
Note: Some Macintosh systems do not
require a Macintosh Cable Adapter
Macintosh Cable Adapter (not included)
