49
... English
Appendices
Specifications
Model Number
NP-L102W
Optical
Projection System
Single DLP® chip (0.45”, aspect ratio 16:10)
Resolution
*1
1,039,680 pixels (16:10 WXGA)
Lens
Fixed lens, manual focus
f=13.9mm at 60”, F=1.5
Light Source
3 LEDs
Image Size (Diagonal)
Minimum: 43.2 cm/17 inches to maximum: 254 cm/100 inches
Projection Distance
(mini. - max.)
0.52 m /20.5 inches to 3.0 m/118 inches
Light Output
*2 *3
1000 lumens
Contrast Ratio
*3
(full white:full black)
10,000:1
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when [Picture Mode] is set to [High-Bright] in the menu. If any other
mode is selected as [Picture Mode], the light output value may drop slightly.
*3 Compliance with ISO21118-2005
Electrical
Inputs
1 x RGB/Component (D-Sub 15P), 1 x HDMI (19P) HDCP supported
*4
, 1 x SD Slot, 1 x
Video (RCA), 1 x USB Type-A, 1 x USB mini-B, 1 x Stereo Mini Audio
Output
1 x Stereo Mini Audio
Service Port
1 x mini-B USB (for service purpose /shared with USB Display)
Color Reproduction
16.7 million colors simultaneously, Full color
Compatible Signals
*5
Analog: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WSXGA+/
480i/480p/576i/576p/720p/1080i/1080p
HDMI: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WSXGA+/
480p/576p/720p/1080i/1080p
Horizontal Resolution
540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate
Horizontal: 30kHz to 100kHz
Vertical: 50 Hz to 85 Hz (120Hz for 3D signal)
Built-in Speaker
2W (monaural)
Power Requirement
100 – 240V AC, 50/60 Hz
Input Current
100 – 240V AC, 50-60Hz, 1.3-0.5A
Power Consumption
(Typical value)
Eco Mode: Off
110W@ 110V AC(100-130V) / 107W@ 220V AC(200-240V)
Eco Mode: On
72W@ 110V AC(100-130V) / 71W@ 220V AC(200-240V)
Standby: <0.5W (100-130V)/ <0.5W (200-240V)
