NEC ITK-6DGS-1, Start Manual, Page: 17 / 43

12
To Pickup a Call from any Group (Group Call Pickup):

From any phone, dial *97 and the Group number that the call is
ringing, or select the Call Pickup “from specific Pickup Group”
(programmed previously via Control Panel).
To Pickup a Call from any Station (Any Call Pickup):

From any phone, dial *96 to answer a call of any ringing station or
select the Call Pickup “Any company call” (programmed previously via
Control Panel).
CONFERENCE
To conference a call:
1.
While on a call, press the “Conf” soft key or press the “Transfer” soft
key.
2.
Use the keypad to dial the telephone number of the party to be joined
to the conference.
3.
Press the “Dial” soft key to initiate the call, or wait a few seconds for
the call to be automatically dialed.
4.
If you decide not to complete the conference, then the call can be
terminated by pressing the “EndCall” soft key.
5.
If you want to switch between each party before the conference is
established, you can use the “Shuttle” soft key.
6.
You can complete the conference by pressing the “Conf” soft key.
Hang up while conferencing:

If you are establishing a conference call and want to hang up on the
person you are calling, press the “EndCall” soft key.

Pressing the key while the phone and the third party is still ringing, the
other two parties will be connected in a blind transfer call.

If you hang up the telephone handset or press the “Speaker” key while
the phone for the third party is still ringing, the other two parties are
connected in a blind transfer call.