75
Figure 67. Settings for Figure 66
trunk
Ethernet port. All three VLANs are assigned to the same
trunk
port (MC-A4
Port 02).
FDB Setting
Forwarding Data Base
contains the L2 switch MAC-address settings.
Retrieve Current FDB
– check and store the MAC-addresses e.g. for trouble shooting. Use a Microsoft
application to open the file (e.g. Word, WordPad or Excel) to see the file in a readable format.
Ethernet OAM Setting
This is a complex collection of settings not explained in this document version.
RSTP Setting
In simple networks consisting of linear and branching point to point links this setting is not required. STP
Mode = Disable.
Link Aggregation Setting
Normally there are no LAG groups unless the Ethernet connection from the IDU to an external switch needs
to be redundant (use dual cables and interfaces) or unless single cable capacity is not sufficient (e.g. 2 x FE
ports only available in the external switch). The LAG group will balance the traffic (with limitations)
between the two ports.
ERP Setting
Ethernet Ring Protection
is not addressed by this document version.
