49
Figure 34. NMS settings.
NE2 Port Setting
: NE2 is on the AUX-A card, a serial port used when interfacing some legacy equipment.
Default Not Used
.
In band Management VLAN Setting
- Default
“Not Used”.
The settings here assume that NMS port is used
for management.
Default setting
.
Ethernet Port Setting
NMS
Root Element select
Used
,
Auto Negotiation: Enabled
and
Discovery Usage: Used
.
LLDP Mode: Standard.
This setting is correct for root elements.
Other elements. Normally NMS port is
Not Used
unless two IDUs are interconnected
.
Modify default
setting for normal elements. Element setting.
NMS port can be used for testing the connection to NMS server from the remote sites. The PC should be
given a suitable IP address from the same subnet as the iPasolink cluster by the network administrator.
