CHAPTER 3 CONNECTION OF COMPONENTS
User’s Manual U14487EJ2V0UM
25
3.2
Connection to Target System
There are two connection methods: connecting the connection tab of the option board to the target system directly
and connecting the connection tab of the option board to the target system via an extension probe.
(1) Connect the connectors to the target system. The connection methods vary depending on the target device, so
connect as shown in the figures below.
Figure 3-1. Connecting to Target System (1/5)
(a) When the target device is the V850E/MA1 (QFP package), V850E/IA1, V850E/IA2 (GC package)
<1>
Fix to the specified position by soldering.
<2>
Insert.
<3>
Fix using YQGUIDE.
Caution The direction of pin 1 is indicated on the NQPACKxxxSD. Refer to Figure 3-2.
YQGUIDE
YQPACKxxxSD
NQPACKxxxSD
<1>
<2>
<3>
<3>
Target system
