CHAPTER 3 INSTALLATION
User’s Manual U14363EJ2V0UM
21
(1) Clock that is already mounted on emulation board
A crystal oscillator (X1) is already mounted on the emulation board. Its frequency is 5.0 MHz.
Figure 3-3. When Using Clock That Is Already Mounted on Emulation Board
IE-78K0S-NS or IE-78K0S-NS-A
IE-789136-NS-EM1
Clock oscillator or external clock
(not used)
Mounted
oscillator
(to be used)
Emulation probe
Target system
Remark
The clock that is supplied by the IE-789136-NS-EM1’s oscillator (encircled in the figure) is
used.
(2) Clock that is mounted by user
The user is able to mount any clock supported by the set specifications on the IE-789136-NS-EM1.
Remove the crystal oscillator (X1) that is already mounted on the emulation board, and mount either the parts
board on which the resonator to be used is mounted or an oscillator. This method is useful when using a
different frequency from that of the premounted clock.
Figure 3-4. When Using User-Mounted Clock
IE-78K0S-NS or IE-78K0S-NS-A
IE-789136-NS-EM1
Clock oscillator or external clock
(not used)
Target system
Emulation probe
Parts board
+ resonator
or
oscillator
Remark
The clock that is supplied by the parts board with a resonator or oscillator on the IE-789136-
NS-EM1 (encircled in the figure) is used.
