CHAPTER 3 INSTALLATION
User’s Manual U16556EJ1V0UM
21
(1) Clock that is already mounted on emulation board
A crystal oscillator is already mounted on the emulation board. Its frequency is 12.58 MHz.
Figure 3-3. When Using Clock That Is Already Mounted on Emulation Board
Emulation probe
Target system
Resonator
(not used)
Mounted
oscillator
(to be used)
IE-78K4-NS
IE-784937-NS-EM1
Remark
The clock that is supplied by the IE-784937-NS-EM1’s oscillator (encircled in the figure) is used.
(2) Clock that is mounted by user
The user is able to mount any clock supported by the set specifications on the IE-784937-NS-EM1. First mount
the resonator on the parts board, then attach the parts board to the IE-784937-NS-EM1. This method is useful
when using a different frequency from that of the pre-mounted clock.
Figure 3-4. When Using User-Mounted Clock
IE-78K4-NS
IE-784937-NS-EM1
Parts board
Resonator
(to be used)
Emulation probe
Target system
Resonator
(not used)
Remark
The clock that is supplied by the IE-784937-NS-EM1’s resonator (encircled in the figure) is used.
